Brillianics Technologies Private Limited
Hongasandra, Bengaluru, Karnataka
Send E-mail
Send SMS
Home»Our Products»

Sensor

Providing you the best range of microwave sensor & dimming driver, wireless pir motion sensor, wireless ceiling pir sensor, wireless vibration sensor, wired glass break sensor and wired pir motion sensor with effective & timely delivery.

REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

Product Details:
Voltage220 -240V AC
Frequency50/60Hz
Daylight Sensor25 lux/2000 lux
HF System5.8GHz CW Radar
Installing Height1.5-3.5m
Rated Load1200W, 300W
Detection Range180 Degree C
Power ConsumptionApprox 0.9W

The product is a new saving-energy switch; it adopts microwave sensor mould with high-frequency electro-magnetic wave (5.8GHz) and
integrated circuit. It gathers automatism, convenience, safety, saving-energy and practical functions.

The wide detection field depends on detectors. It works by receiving human motion. When one enters the detection field, it can start the load at once and identify automatically day and night. Its installation is very convenient and its using is very wide. Detection is possible to go through doors, panes of glass or thin walls.


Features:

  • Detection Distance : 7.5m/15m (choice)
  • Detection Range : 50%, 100% (Choice)
  • Hold Time : 5s, 90s, 3min, 20min (Choice)
  • Transmission Power : < 0.2mW
  • Detection Motion Speed : 0.6-1.5 m/s
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

Product Details:
Operating Voltage9V Laminated Battery
Standby CurrentLess than 12uA
Alarm CurrentLess than 22mA
Transmitting Frequency433MHz
Installation Height2~2.3m
Dimensions107x59x45 mm
Temperature Range-10 to +50 Degree C
Wireless PIR Motion Sensor
  • Internal Wireless Antenna, long distance transmission;
  • Learning code, easy to assign to the alarm panels;
  • Tamper Switch for protecting the to avoid opened; Newly-developed dual element passive infrared sensor unit;
  • Wireless transmitting digital signal to control panel;
  • Intelligent MCU inside, eliminate false alarm;
  • Low power alert by buzzer sounds;
  • Microcontroller temperature analysis and Automatic temperature compensation for best summertime detection;

 

Specification:

Detection RangeVertical angle 60degree, Horizontal angle 110 degree, 12m
RF Immunity> 20 V/m 10 – 1000 MHz
Sensitivity> 3300V/W
Sensitivity> 3300V/W
Noise(Vp-p)<200mV, (mVp-p)(25°C)
Transmitting Distanceminimum 10-15m( in the open area)
Relative Humidity90% (25°C)
Installation ModeWall mounted by bracket
HousingHigh-impact ABS
ApplicationsFor indoor use. Corridor, Office, Room, Museum, Library, Finance Room, Warehouse, etc.
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

Product Details:
Operating Voltage3V Lithium Battery
Standby CurrentLess than 12uA
Alarm CurrentLess than 15mA
Transmitting Frequency433.92 MHz
Temperature Range-10 to +50 Degree C
Installation Height2.5~6m
Dimensions107x59x45 mm
Wireless Ceiling PIR Sensor
  • Newly-developed dual element passive infrared sensor unit;
  • Wireless transmitting digital signal to control panel;
  • Intelligent logic control, eliminate false alarm;
  • Low power indication by LED indicator;
  • Microcontroller temperature analysis and Automatic temperature compensation for best summertime detection;
  • Tightly-mated bug guard to protect the sensor optics from insects, spiders and dust;


Specification:

Detection RangeAround angle 360degree, 9m
RF Immunity> 20 V/m 10 – 1000 MHz
Sensitivity> 3300V/W
Noise(Vp-p)<200mV, (mVp-p)(25°C)
Transmitting Distanceminimum 10-15m( in the open area)
Relative Humidity90% (25°C)
Installation ModeCeiling Mounted
HousingHigh-impact ABS
ApplicationsFor indoor use. Corridor, Office, Room, Museum, Library, Finance Room, Warehouse, etc
Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

Product Details:
Power SupplyDC 12V
Operating Frequency433 MHz
Transmitting Dstance25 mm
Volume120dB
PackagingBlister Packaging
Features:
  • External antenna
  • Tamper protection
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

Product Details:
MaterialABS
Dimension90 x 66 x 25 mm
Power SupplyDC 12V 5A
Operating Temperature-20 ~ 50 Degree
Digital Processor12/8 bits 8 MHZ
The Glass Break Sensor is An INPUT DEVICE which is triggered by the sound of breaking glass. This is the perimeter protection for the windows or glass or and other buildings. The glass break sensor is usually installed on glass doors and windows and glass walls.
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

Product Details:
Operating VoltageDC9V~16V
Temperature Range-10 to +50 Degree C
Installation Height2m
Dimension107x59x45 mm
Installation ModeWall mounted by bracket
Features:
  • Long distance transmission.
  • Learning code, easy to assign to the alarm panels.
  • Tamper Switch for protecting the to avoid opened.
  • Newly-developed dual element passive infrared sensor unit.


Specification:

Detection RangeVertical angle 60degree, Horizontal angle 110 degree, 12m
Standby CurrentNC≤15mA ; NO≤6mA
Alarm CurrentNC≤19mA ; NO≤18mA
RF Immunity> 20 V/m 10 – 1000 MHz
Sensitivity> 3300V/W
White Light Immunity> 8000 lux
Noise(Vp-p)<200mV, (mVp-p)(25°C)
Alarm OutputNC or NO
Relative Humidity90% (25°C)
HousingHigh-impact ABS
ApplicationsFor indoor use. Corridor, Office, Room, Museum, Library, Finance Room, Warehouse, etc.
Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

Product Details:
Operating Voltage2X3V AA Battery
Standby CurrentLess than 25uA
Alarm CurrentLess than 15mA
Transmitting Frequency433.92 MHz
Temperature Range-10 to +50 Degree C
Wireless Curtain PIR Sensor
  • Newly-developed dual element passive infrared sensor unit;
  • Wireless transmitting digital signal to control panel;
  • Intelligent logic control, eliminate false alarm;
  • Low power indication by LED indicator;
  • Microcontroller temperature analysis and Automatic temperature compensation for best summertime detection;
  • Tightly-mated bug guard to protect the sensor optics from insects, spiders and dust;

 

Specification:

Detection RangeVertical angle 15degree, Horizontal angle 90 degree, 9m
RF Immunity> 20 V/m 10 – 1000 MHz
Sensitivity> 3300V/W
Noise(Vp-p)<200mV, (mVp-p)(25°C)
Transmitting Distanceminimum 10-15m( in the open area)
Relative Humidity90% (25°C)
Installation ModeWall mounted by bracket or Ceiling Mounted
Installation Height2m(Wall mounted by bracket), 5-9m (Ceiling Mounted)
HousingHigh-impact ABS
ApplicationsFor indoor use. Corridor, Office, Room, Museum, Library, Finance Room, Warehouse, etc.
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

QUALITY CONTROL STANDARDS: 
Operating Volt: AC 220-250V 50Hz-60Hz.
Load power: Upto 300/1200W Max
Ambient Light: 3-2000 (Adjuestable)
Load type: Incandescent lamp, LED light, CLF, fans, etc
Detecting distance: 0~7M
Detecting Angle: 360 Degree.
Installtion Hight: 2.2-4 Mtr
Motion Detetion Speed: 0.6~1m/s
Power Cusumption:0.1W (static) & 0.4(Work)
Working Humidity: less than 93%RH
Delay: 10 Seconds -7 Minutes (Adjustable)

Model no : BT31C

Use:

Home, Office, Shops, Hospitals, Bathroom, Corridor, Step, Parking area & etc

 PRODUCT INSTALLATION:

1.Keep Sensor unit 1.6 Mtr higher from the ground level.
2. The light, such as incandescent lamp which emits high heat should be kept from the switch aways, or it will be turn on/off voluntarily.
3. On being fixed to the wire first time, the switch’ initialization will take 1-2 minutes. It’s natural for the switch to turn on/off voluntarily.
4. When you install the switch on daytime, the Default State of the switch will make the light off.Keep the detector of the switch from illumination, & then the light will turn ON. The darker, the switch will be more sensitive. If it is not very sensitive, turn the yellow port counterclockwise with a long and thin tool to get a proper light sensitivity.

 

PACKAGE INCLUDES:

1 x Infrared Switch Board
1 x Wall /Celing fitting Plate
1 x Instionas Manual
2 x Mounting Screw

Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

QUALITY CONTROL STANDARDS: 

  • Operating Volt: AC 220-250 V 50 Hz-60 Hz.
  • Load power: Upto 300/1200W Max
  • Ambient Light: 3-2000 (Adjustable)
  • Load type: Incandescent lamp, LED light, CLF, fans, etc
  • Detecting distance: 10~12 Mtrs(Dept temp)
  • Detecting Angle: 180 Degree.
  • Installation Height: 2.2-4 Mtr
  • Motion Detection Speed: 0.6~1 m/s
  • Power Cusumption:0.1W (static) & 0.4(Work)
  • Working Humidity: less than 93%RH
  • Delay: 10 Seconds -7 Minutes (Adjustable)

Model No: BT31W

Use:

Home, Office, Shops, Hospitals, Hotelas, Bathroom, Corridor, Step, Parking area & etc

 WARRANTY  

18 Months

 

PACKAGE INCLUDES:

1 x Infrared Switch Board
1 x Installation Manual
2 x Mounting Screw

Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

QUALITY CONTROL STANDARDS

  • Operating Volt: AC 220-250V 50Hz-60Hz.
  • Load power: Upto 1200W Max
  • Ambient Light: 3-2000Lux (Adjuestable)
  • Load type: Incandescent lamp, LED light, CLF, fans, etc
  • reach:1-8m(radii.), adjustable
  • HF system: 5.8GHz CW radar,ISM band
  • Detecting distance: 0~8M
  • transmission power:<10mW
  • Detecting Angle: 360 Degree.
  • Installtion Hight: 2.2-4 Mtr
  • MotionDetetion Speed: 0.6~1m/s
  • Power Cusumption:0.1W (static) & 0.4(Work)
  • WorkingHumidity: less than 93%RH
  • Delay: 8 Seconds -12 Minutes (Adjustable) 

Model No : BT31M

Use:
Home, Office, Shops, Hospitals, Bathroom, Corridor, Step, Parking area & etc

WARRANTY-18Months

PACKAGE INCLUDES:

1 x Microwave Sensor unit
1 x Celing fitting Plate
1 x Instionas Manual
2 x Mounting Screw

Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

  • Rated control voltage: 16A(8)Amp,180~ 250V AC. The panel-mount digital timer series can be operated in 4 separate power supplies.
  • The digital timer is accurate to the minute, hour, days, designed with either 17 ON/OFF (event) per day
  • Provide 15 combination of daily programs which can lead great convenience to user upon choosing the required days in a week for operation the time
  • Advanced pre-setting one week before, digital electronic timer switch with daily and weekly programs
  • Repeat programs with 17 on/off setting and manual override lithium battery power reserve when electric supply cut off
 

Model no :BT41F1

 Programmable Timer Time Switch Relay

 

 

Features :

Built-in Rechargeable Battery :
Built-in 1.2V/40mA rechargeable battery stand by time for up to 60 days.

Humanized Design :
Power failure memory function avoids data less

Tips :
Before starting the program, the timer should be charged for at least 5 minutes as the inbuild battery may be of no battery
Before setting the program, press the key button reset, to clear the memorize data for the new instructions.
After the program is made, please insert the timer to the plug. Then connect the electric appliance to the timer.

Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

QUALITY CONTROL STANDARDS: 


  • Operating Volt: 220 Volt/ 50 Hz
  • Output Current: 10 Amp
  • Min Setting time: 15 Min
  • Operating Temperature: 20 to + 80 Deg C
  • Current Consumption: 0.015MAmm
  • Relative Humidity: less than 95%
  • Socket Type: Indian Standard 
     

    Model no : BT41PL

     This socket product programe control by Chip set (MCU), It can be to set OFF only for specific time period. Time setting range: Min 15 Min to 15 Hours 45 Mins 

    Scope Of Applications:


    1. Household appliances ON/OFF regularly such as Water Machine, Water Heater, Air Conditioning, electric cooker, Advertising display Lights
    2. For Mobile charges, Counters, betters, etc dogmatic appliance.
    3. Areas with pick valley price difference, it can use high-power electrical appliances automatically at low pricing range.
    4. Automatic control home anti-theft systems.

    Features: 


    It is design for simple plug and play operations with time slots15 Mins to 8 Hrs 45 Min.
    Energy-saving electronic timer programming.
    LED indication by timing slots
    Color: White
    Item size: 677*67*35mm
    Net weight:93 Gm

    Yes! I am Interested
    Save time! Get the Best Deal

    *Your information is safe with us.

    REQUEST CALLBACK
    Ask Latest Price

    Product Price: Get Latest Price

    • With honest intentions to improve the standing we have earned in this arena, we are offering a distinct collection of Modular Wireless Remote Switch.

      Note : It can use be use 3 Lights+ 1 Fan/3+2 / 6+1 and 6 +2

       

      Model no : BT20

      Features :

      • High quality
      • Fine finish
      • Long lasting
      • Seamless design

      Use: House, Office, Shops, Hospitals, Restaurants, etc.

      QUALITY CONTROL STANDARDS:

      • Power Supply : 230 Volts, AC, 50 Hz.
      • Wattage Limit : 600 Watts per point for incandescent load and 200 Watts per point for Fluorescent load.
      • I/R based remote control.
      • Remote control working range up to 30 Ft.
      • Inverter compatible.
      • Power Resumption Status : ON
      • Support 0-4 levels of speed / brightness of fan / dimmer.
      • Use micro Lithium battery “AAA” for remote control.
      • Installation Compatibility : 4 module mounting box (Modular).
      • Dimension of mounting box : 79 x 135 mm.
      Yes! I am Interested
      REQUEST CALLBACK
      Ask Latest Price

      Product Price: Get Latest Price

       

      Specification:

      1.Detection Range: 180 degree
      2.Power Consumption: 0.45W (work) 0.1W (static)
      3.Detection Distance:max.12m
      4.IP65


       

      Model no : BT31S

      This product adopts high sensitivity detector, integrate circuit and SMT; It gathers automatic, convenient, safe, energy-saving, practical functions; It has wide detection range made up of up and down, left and right service field; It utilizes human motion infrared rays as control signal sources, when one enters the detection field, it will start the controlled load at once; It can identify day and night automatically; It is easy to install and its usage is wide; It has the function of power indication and detection indication

      Function:

      Detection field: The wide detection range is made up of up and down, left and right, the detection range could be adjusted according to your desire, but the moving orientation in detection field has great relation with the sensitivity.

      Identify day and night automatically: The ambient light of product could be adjusted according to your desire: when turn to SUN (max), it will work day and night, when turn it to MOON (min), it will only work in the ambient light less than 3LUX. As for adjustment, please refer to testing way.

      Time-delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the rest of the first time-delay basis (set time).

      Time-delay is adjustable: It can be set according to your desire, the minimum is 10sec±3sec, and the maximum is 7min±2min.

      PRODUCT INSTALLATION:


      1.Keep Sensor unit 1.6 Mtr higher from the ground level.
      2. The light, such as incandescent lamp which emits high heat should be kept from the switch aways, or it will be turn on/off voluntarily.
      3. On being fixed to the wire first time, the switch’ initialization will take 1-2 minutes. It’s natural for the switch to turn on/off voluntarily.
      4. When you install the switch on daytime, the Default State of the switch will make the light off.Keep the detector of the switch from illumination, & then the light will turn ON. The darker, the switch will be more sensitive. If it is not very sensitive, turn the yellow port counterclockwise with a long and thin tool to get a proper light sensitivity.

      Installation: (see the diagram)

      Shut off power.

      Loosen the screw on the bottom lid, open the wiring terminal, pass the wire of power and load through the bottom lid.

      Fix the bottom lid with inflated screw on the selected position.

      Connect the power and load wire into connection-wire column according to the connecting figure.

      Put the sensor on the bottom lid, twist the screw tightly then electrify it and test it.

      CONNECT-WIRE FIGURE:(See the right figure)

       

      Power Frequency50/Hz
      Working Temperature-20~+40°C
      Ambient Ligh3-2000LUX (adjustable)
      Working Humidity93%RH
      Time-delay10sec±3sec to 7min±2min
      Installation Height1.8m~2.5m
      Rated Load1200W (incandescent lamp) 300W (energy-saving lamp)
      Power Consumption0.45W(work) 0.1W(static)
      Power source220V-240V/AC
      Detection Distance12m max (<24°C)
      Detection Range180º (<24°C)
      Detection Motion speed0.6~1.5m/s
      Yes! I am Interested
      REQUEST CALLBACK
      Ask Latest Price

      Product Price: Get Latest Price

      QUALITY CONTROL STANDARDS: 

       

      • Operating Volt: AC 220-250V 50Hz-60Hz.
      • Load power: Upto 1200W Max
      • Ambient Light: 3-2000Lux (Adjuestable)
      • Load type: Incandescent lamp, LED light, CLF, fans, etc
      • reach:1-8m(radii.), adjustable
      • HF system: 5.8GHz CW radar,ISM band
      • Detecting distance: 0~8M
      • transmission power:<10mW
      • Detecting Angle: 360 Degree.
      • Installtion Hight: 2.2-4 Mtr
      • MotionDetetion Speed: 0.6~1m/s
      • Power Cusumption:0.1W (static) & 0.4(Work)
      • WorkingHumidity: less than 93%RH
      • Delay: 8 Seconds -12 Minutes (Adjustable) 

      Model no : BT31M1


      WARRANTY

      18Months

      Use:
      Home, Office, Shops, Hospitals, Bathroom, Corridor, Step, Parking area & etc

       

      PACKAGE INCLUDES:


      1 x Microwave Sensor unit
      1 x Celing fitting Plate
      1 x Instionas Manual
      2 x Mounting Screw

      Yes! I am Interested
      Save time! Get the Best Deal

      *Your information is safe with us.

      REQUEST CALLBACK
      Ask Latest Price

      Product Price: Get Latest Price

      Specification:  

      • long life 
      • Rated voltage: 250V  (Working on a AC & DC both)
      • Rated current: 8A ·
      • Working temperature: 0-80°C ·
      • Mechanical endurance: ≥100,000 times ·
      • Electrical endurance: ≥500,000 times · Cable: 3m /78.7″ ·
      • Contacts: NO+NC ·
      • Shape: Square · Weight: 690 gm

        Model no: BT19

        Feature:

        Can automatically adjust, easy to operate, easy to install, safe, reliable, maintenance-free, non- toxic and environmentally friendly.

        Advantages: ·

        • Corrosion Free, · Sturdy and durable & need no maintenance.
        • No current / voltage is passed through water, therefore no electrolysis or Salt deposition. ·
        • Long life (approximate 10 million operations) ·
        • Rust proof (entire sensor body in polypropelene) ·
        • Can be used in hard water or fuel such as diesel, kerosene, oil etc. 

        Note:

        It can available with 2/3/5 Mtr wire cables. 

        INSTRUCTIONS FOR INSTALLATION:
        Insert the cable in the counter weight (yellow color part), from the conical part and rotate it. Thus causing the plastic ring inserted in the opening to become detached (if necessary this operation can be facilitated with the use of a screwdriver). The ring should then be positioned in the point where it is desired to block the counterweight. Force the counterweight on the ring by rotating it using a slight pressure.

        Yes! I am Interested
        X
         

        Download Brochure
        Explore more products
        Corporate Information
        Share Us
        Brillianics Technologies Private Limited

        Manoj Ravindran(CEO)
        1282, 2nd Floor, 16th Cross
        Hongasandra, Bengaluru - 560068
        Karnataka, India
        Send Email
        © Brillianics Technologies Private Limited. All Rights Reserved (Terms of Use)
        Developed and Managed by IndiaMART InterMESH Limited